User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 86
3.5.3.7 Telnet Settings
At the Main Web GUI Interface Screen select the Configuration Tab and select the web Main Menu
Option. This will display the web Settings and the display is split into two main grouping sections (refer
to Figure 79). There are no further sub-element associated with this option. The main grouping sections
are:
Web Server HTTP Support. This indicates the Base Station HTTP options. The configuration
options are:
o Enabled. This indicates whether the HTTP Support option has been enabled or not. This
is a User configurable value that is edited via a check box. The default configuration is
disabled.
o Port Number. This is the port number for HTTP Support. This is a User configurable
value that is edited via a notepad icon.
Web Server HTTPS Support. This indicates the Base Station HTTP options. The configuration
options are:
o Enabled. This indicates whether the HTTPS Support option has been enabled or not. This
is a User configurable value that is edited via a check box. The default option is enabled.
o Port Number. This is the port number for HTTPS Support. This is a User configurable
value that is edited via a notepad icon.
Figure 79: Web Server HTTP Support
3.5.3.8 Configuration Settings
All the Base Station configuration parameters are contained and stored local on the Base Station in flash
memory, via a number of configuration files. The User has the complete control to perform a variety of
functions such as copy, move, delete and restore etc on these files. This presents a User with an option,