User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 85
Figure 77: Time NTP Server Synchronization Update
3.5.3.6 Telnet Settings
At the Main Web GUI Interface Screen select the Configuration Tab and select the telnet Main Menu
Option. This will display the /telnet/server Settings and the display is split into one main group section
(refer to Figure 78). There are no further sub-element associated with this option.
The /telnet/server settings are:
Enabled. This indicates whether the telnet option has been enabled or not. This is a User
configurable value that is edited via a check box.
Figure 78: Telnet Server Enabled