User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 84
To view the current System Time and Date Settings then at the Main Web GUI Interface Screen select
the Configuration Tab, select time Main Menu Option and then the set Main Menu Sub-Element. The
display is split into two main grouping sections (refer to Figure 76).
Set System Time and Date. This is a text box that contains the Perform Command Menu Option.
Set System Time and Date. The User is free to configure the Time and Date. The dialog time is
specified in 24-hour format and includes milliseconds (“Ms”), which may simply be set to 0. TzH
is the timezone hours offset from Coordinated Universal Time (UTC) and is between -23 and
+23. TzM is the timezone minutes offset from Coordinated Universal Time (UTC) and is between
0 and 59. Once these parameters have been configured, the User must select the Perform
Command Menu Option for the changes to be effected.
Figure 76: Time NTP Server System Set
To view the NTP Time/Date Synchronization then at the Main Web GUI Interface Screen select the
Configuration Tab, select time Main Menu Option, then ntp Main Menu Sub-Element and then
ntpdate. The display is split into two main grouping sections (refer to Figure 77).
NTP Time/Date Synchronization. This command will perform a one-time synchronization to the
selected NTP server. To apply the User simply needs to select the Perform command button.
NTP Time/Date Synchronization. The User can configure the NTP Server IP address to perform
the one time synchronization with.