User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 83
then they can edit, delete or add another NTP server. If the User enters the Edit mode for this
parameter, then a further sub element with two more windows appear and the User can edit as
required (refer to figure 72). The User can configure:
o Ip-address. This is the IP Address of the NTP Server.
o Version. This is the protocol version of the NTP Server.
o Enabled. This indicates whether the NTP Server is enabled.
Figure 74: Time NTP Server Settings
Figure 75: Time NTP Server Configuration