User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 82
At the Main Web GUI Interface Screen select the Configuration Tab and then select the time Main Menu
Option. This will display the System Date and Time Settings and the display is split into one main group
section (refer to Figure 73). In addition, the time menu option has a single further sub-element.
The further sub element is:
ntp. These are the NTP time settings.
Figure 73: Time Settings
An indication as to whether there are any User configurable parameters included in the group is
provided. If the User wants to configure any of the parameters then they must enter the Edit Mode
(select Edit Private or Edit Exclusive) and edit as necessary. The methods to Edit the parameters will be
offered via drop down menu.
The System Date and Time Settings window contains:
System Time and Date. This is an indication of current date and time. This is not a User
configurable parameter.
Timezone. This is an indication of the timezone. The Use is free to select their respective
timezone and multiple options are available via the dropdown menu.
To view the Network Time Protocol Settings then at the Main Web GUI Interface Screen select the
Configuration Tab, select time Main Menu Option and then ntp Main Menu Sub-Element. The display is
split into two main grouping sections (figure 71).
Network Time Protocol Settings. This is an indication as to whether NTP has been enabled. The
options are enabled and disabled with disabled as the default.
NTP Server Settings. This is an indication of the IP address, the NTP protocol version and
whether the server is enabled of the NTP server. If the User wants to configure the NTP settings