User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 79
At the Main Web GUI Interface Screen select the Configuration Tab, select system Main Menu Option,
reset Main Menu Sub-Element and then interface. This provides the User with the options to configure
the System Management Static IP Address (refer to Figure 70). If the User wants to configure any of the
parameters then they must enter the Edit Mode (select Edit Private or Edit Exclusive) and edit as
necessary. The methods to Edit the parameters will be offered via editing of a notepad icon.
The parameters to configure for the Base Station Static Management IP Address are:
Address
Netmask
Default Gateway
Figure 70: System Management Static IP Address
At the Main Web GUI Interface Screen select the Configuration Tab, select system Main Menu Option
and then inventory Main Menu Sub-Element. This will provide the User with an inventory checklist of
the internal hardware modules of the Base Station (refer to Figure 71).
Figure 71: System Base Station Inventory