User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 75
Figure 66: System External ASN Gateway Settings
The System display is split into four main grouping sections. These sections do not fit onto one screen
and therefore the User has to scroll down to view etc. An indication as to whether there are any User
configurable parameters included in the grouping is provided. If the User wants to configure any of the
parameters then they must enter the Edit Mode (select Edit Private or Edit Exclusive) and edit as
necessary. The methods to Edit the parameters will be offered via a drop down menu of choices or
editing of a notepad icon.
External ASN-Gateway Settings. These are the settings for any external ASN Gateway that is
connected to the Base Station.
Base-Station Settings. These are the settings for the Base Station.
External Radius Server Settings. These are the settings for the external Radius Server, if
configured.
/system/base-station/neighbor. These are settings which are broadcasted by the base station
so that the CPE understands which neighboring Base Stations to scan
The parameters that the User can configure and the relevant grouping section that they belong are
outlined below. After making the various configuration changes, the User will need to "Commit" and
"Save" the changes.
External ASN-Gateway Settings.
o ASN-Gateway IP Address. This is the IP address of the ASN Gateway that the Base
Station is connected to. An IP address has to be provided if the Base Station has been
configured to operate in ASN Gateway mode.
o ASN-Gateway Port Number. This is the Port Number that the Base Station use to
communicate with the ASN Gateway.