User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 74
The System display is split into seven main grouping sections. These sections do not fit onto one screen
and therefore the User has to scroll down to view etc. An indication as to whether there are any User
configurable parameters included in the grouping is provided. If the User wants to configure any of the
parameters then they must enter the Edit Mode (select Edit Private or Edit Exclusive) and edit as
necessary. The methods to Edit the parameters will be offered via a drop down menu of choices, an
enabling of a check box or editing of a notepad icon.
System Console Settings.
System Miscellaneous Settings.
/system/state. This option does not contain any User configurable parameters.
System General Settings.
System Identification Setting. This option does not contain any User configurable parameters.
System Utilization Statistics. This option does not contain any User configurable parameters.
The parameters that the User can configure and the relevant grouping section that they belong are
outlined below. After making the various configuration changes, the User will need to "Commit" and
"Save" the changes.
System Console Settings.
o Baudrate. This is the baud rate that is configured for serial connection via the Base
Station Console Port. The default is 38400 and the available options are 115200, 57600,
38400, 19200 and 9600.
System Miscellaneous Settings.
o Hostname. This is a free format text field for the User to specify a hostname.
o Led-enabled. The User can enable or disable the LED indicators for the Base Station.
System General settings.
o Name. This is a free format text field for the User to specify a name to the Base Station.
o Location. This is a free format text field for the User to specify a location to the Base
Station.
o Contact. This is a free format text field for the User to specify a contact for the Base
Station.
At the Main Web GUI Interface Screen select the Configuration Tab, select system Main Menu Option
and then the base-station Main Menu Sub-Element. This will display the External ASN-Gateway Settings
window (refer to Figure 66).