User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 73
After making the various configuration changes, the User will need to "Commit" and "Save" the
changes.
The Security Settings parameters that the User can configure are defined below:
AK Lifetime. This stands for Authorization Key lifetime. It is used when authentication and
encryption is enabled. It is periodically re-generated by the Base Station after a request is
received from a Subscriber following expiration of this timeout. The default setting is 6048000
but the User is free to enter any value.
Enabled. This indicates whether the Security Feature has been enabled or not.
TEK Lifetime. This stands for Traffic Encryption Key lifetime. It is used when authentication and
encryption is enabled. It is periodically re-generated by the Base Station after a request is
received from a Subscriber following expiration of this timeout. The default setting is 43200 but
the User is free to enter any value.
3.5.3.3 System Settings
At the Main Web GUI Interface Screen select the Configuration Tab and then select system Main Menu
Option. This will display the System Settings window. The system menu option has three further sub-
elements , these being (refer to Figure 65):
base-station. This details various Base Station parameters.
reset. This is a means for the User to default the Base Station back to its "out of the box" initial
configuration values.
Figure 65: System Settings