User's Guide Part 2

PureWave Quantum 6600 User Guide v2.1
Page 60
Mode. This is the Base Station Mode and the available options are standalone-local (this is
selected when the Base Station is used in a standalone mode and it is not connected to an ASN
Gateway) the and asn-gateway (selected when the Base Station is connected to an ASN
Gateway).
Figure 47: Sector General Provisioning Parameters
At the Main Web GUI Interface Screen select the Configuration Tab, select sector Main Menu Option,
general Main Menu Sub-Element, 1, system and then ip and this will display the current configuration of
the Sector External IP Address (refer to Figure 48). This is the Management IP Address through which
the User is able to communicate to the Base Station. The Management IP parameters that the User can
configure are:
Address. This is the IP address
Netmask. This is the netmask associated with the IP address
Gateway. This is the defined gateway.