User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 45
(3) The system will use the stored startup configuration after rebooting. Unwritten changes in the
running configuration will be lost.
(4) There are two reboot options under the administration Main Menu options including
reboot. This option will reboot the Base Station
reboot-sectors. This option will reboot the internal elements of the Base Station that are
pertinent to the sector RF elements only. After the reboot-sectors option has been
performed then an appropriate window indicating a successful reboot execution will be
displayed. The subsequent time for the Base Station to become operational is approximately
2 minutes.
3.4.2 Web GUI CLI Access Level
The PureWave Quantum Base Station has a Command Line Interface (CLI) that can be accessed from
within the Web GUI. To access the Web GUI CLI then at the Main Web GUI Interface Screen, select the
Tools Tab. The User will be presented with a number of User tools (figure 27).
Figure 27: The Tools Tab Menu Options
The User is presented with four Tools Command Menu Options. These are:
Logs. This allows the User to display and hence view:
o System log
o Alert log
o Audit log.
Accessories. The following protocols are made available to the User: