User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 44
Note: Several configuration changes require that the Base station be rebooted.
The procedure to reboot a Base Station is as follows:
(1) At the Main Web GUI Interface Screen, select the Configuration Tab, select the administration
Main Menu option and then reboot Main Menu Sub-Element. The User will have to click on the
Perform Command Menu Option to reboot the entire Base Station (refer to figure 25).
Figure 25: Reboot Base Station
(2) Upon clicking perform, the user must confirm the reboot operation by clicking Ok. After the
reboot option has been performed then an appropriate window indicating a successful reboot
execution will be displayed (figure 26). The subsequent time for the Base Station to become
operational is approximately 5 minutes.
Figure 26: Reboot Base Station Successful