User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 41
The Commit Command Menu Option performs a crucial procedure in that it commits all configuration
changes to the running database.
When in Edit mode, the method of configuring and saving changes remains the same. A user
may change any number of parameters but none of those changes will take effect until they
are committed.
Clicking the Commit Menu will result in one of the following actions
If no configuration changes have been made, then a window appears stating "There is nothing
to commit". The User simply selects the OK prompt to navigate back to the Edit Mode.
If changes have been made, then a window appears stating "Do you want to commit your
pending configuration changes?" (refer to figure 21). The User simply selects the OK prompt to
proceed.
Figure 21: Commit Option
When OK has been selected then a window appears stating "The configuration has been
committed" (figure 22). The User simply selects the OK prompt to proceed and navigate back to
the Edit mode.
Note: System configuration changes are first made to the running configuration database in
memory. In order to make the change persistent and survive a restart, the “Configuration-
Write” command must be used.