User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 39
If changes have been made, then a window appears stating "All your non-committed
configuration changes will be reverted" (refer to figure 18). The User simply selects the OK
prompt to proceed and navigate back to the Edit Mode.
Figure 18: Revert All Configuration Changes
If the User has made some configuration changes and these have been committed and saved the User
can make use of the Rollback All window option. A rolling audit log of all configuration changes in stored
within the Base Station (refer to figure 19). This log is a record of:
Rollback File. This is the name of the configuration file.
Creator. This is the creator of the change. This will be the login name that was used at the time
of the configuration change.
Date. This was the date of the change.
Via. This was the method of access to the Base Station that was used to effect the change.
On the right side of the window, is a text pad that provide details of the parameters and how
they were changed.
To effect the Rollback procedure then the User simply has to highlight the relevant rollback file and then
select the Load Command Menu Option (refer to figure 19).