User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 36
3.4.1 Web Interface Configuration Key Concepts
The Web GUI Interface, when the Configuration Tab has been selected, has two major modes of
operation:
View Mode: Read-only access of all parameters. This is the default mode upon initial
log in (refer to figure 14).
Edit Mode: Write access configuration of all available parameters. Within this mode there
are two sub-options:
Edit Private. Edit Private will allow the user to configure all parameters
but will not lock the configuration database, allowing for other users to
make configuration changes at the same time (see Figure 15).
Edit Exclusive. Edit Exclusive will lock the configuration database and
prevent any other user from making configuration changes.
Note: System configuration changes are first made to the running configuration database in
memory. This allows the opportunity for the user to test the changes first before
committing. In order to make the change persistent and survive a restart, the
“Configuration-Write” command must be used.
Figure 14: The Main Web GUI Interface Screen in View Mode