User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 31
3.3.2 Accessing the CLI via an Ethernet Port
(1) Connect a computer using an Ethernet connection to the Base Station ETH-1 port (either directly
or via a router or network). Open an SSH client program such as PuTTY (Figure 7: ). The default
port number is 22.
Figure 7: PuTTY SSH Client Configuration
(2) Create a new SSH profile using the default management IP values. If the defaults have been
changed then please use their current values.
If the management IP settings are "unknown" then the Base Station can only be accessed via
its Console port (refer to section 3.3.1). Once the Base Station has been accessed, its
management IP settings can be reset using the procedure detailed in section 3.4.
(3) The default Login and Password are:
Default login: admin
Default password: admin123