User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 29
3.3.1 Accessing the CLI via the Base Station Console Port
(1) Connect a computer to the Base Station Console port as detailed in section 3.1 above.
(2) Open a terminal emulation program on the computer. Suitable programs are PuTTY or
HyperTerminal (Figure 4).
Figure 4: PuTTY Serial Port Configuration Window
Create a new connection with the serial port settings as outlined in
Table 9.
Serial Console Port Settings
Serial Line
COM1
Speed (Baud Rate)
38400
Data bits
8
Stop Bits
1
Parity
None
Flow Control
None
Table 9: Console Port Settings
(3) A login prompt will be displayed as in fFigure 5: Console Login. The default Login and Password
are:
Default login: admin
Default password: admin123