User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 25
2.3.4 Electro-Mechanical and Environmental Specifications
All PureWave Quantum Family Base Stations consist of a single, all-in-one, fully weatherproof unit that
may be installed entirely outdoors or indoors, as dictated by each deployment. Please refer to the
PureWave Quantum Base Station Installation Guide for detailed installation instructions and guidelines.
Table 7 lists the mechanical, electrical, and environmental properties of the PureWave Quantum 6600
Base Station.
Physical & Environmental
Specifications
Dimensions
17.5” x 16.7” x 5.3”
(44cm x 42cm x 13cm)
Weight
32lbs (14.5kg) (does not include mounting hardware)
Power
-48 VDC (150 Watts Max)
Temperature
-40C to +55C (ETSI EN 300 019-1.4 Class 4.1E)
Note: An available solar shield is required for ambient
temperatures exceeding +45C with full sun exposure.
Humidity
5-100% non-condensing
Altitude
To 10,000 ft above sea level
Surge Protection
UL497B
Lightning Protection
Min 10kA IEC 6100-4-5 (optional via external kit)
Weatherproofing
IEC IP67
Wind Loading
160Km/hr operation, 200Km/hr survival
Lightning Protection
Min 10kA IEC 6100-4-5 (optional via external kit)
Safety and IEC IP
EN 300 019-2-2, GR487, IEC 60529
Vibration and Dust
ETSI EN 300 019-1-4 Class 4.1E
Table 7: Environmental and Mechanical Specifications
For temperatures above +45 degrees C in direct sunlight it is necessary to deploy the Base Station with
the available solar shield, shown in Figure 3. Again, details can be found in the PureWave Quantum
6600 Base Station Installation Guide.