User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 20
2.3.2 Radio and Physical Layer Specifications
The PureWave Quantum Family of Base Stations is available in several models to support a variety of
frequency bands and the regulatory requirements of a number of countries. Because several
deployment-specific variables (e.g., antenna type, cable type and length, settings, etc) can affect the
effective power output and other characteristics of the system, it is the customer’s responsibility to
assure that each deployment of this product meets applicable regulations. The PureView NMS, the Web
UI, and the CLI all provide guidelines and feedback to ensure an appropriate installation.
Table 3 lists key radio-related specifications of PureWave Quantum Base Stations. Note that additional
features, not listed, may be released in future software revisions.
Table 3: Radio and PHY Specifications
Parameter
Specification
Frequency Bands
XX23: 2.3-2.4GHz
XX25: 2.496-2.69GHz
XX33: 3.3-3.4GHz
XX35: 3.4-3.6GHz
XX36: 3.6-3.8GHz, including 3.65GHz US
Channel Sizes
5, 7,10 MHz
Duplex Method
TDD
DL:UL Ratios
35:12, 29:18, 32:15, 26:21 (5MHz and 10MHz)
23:9, 21:12, 17:15 (7MHz)
Number of Tx/Rx
Antennas
Up to 6 Tx, 6 Rx for Quantum 6600 series
Tx Power per Antenna
33dBm (RMS data power at maximum MCS level, measured at each
external antenna connector of the Base Station)
Permutation
PUSC
Modulation
QPSK-1/2, QPSK-3/4
16QAM-1/2, 16QAM-3/4
64QAM-1/2, 64QAM-2/3, 64QAM-3/4, 64QAM-5/6
Data Repetition Coding
QPSK-1/2 Repetition 2, 4, 6
MAP Repetition
1, 2
Smart Antenna
Capabilities
Beamforming, MIMO Matrix A, MIMO Matrix B, Cyclic Delay Diversity,
MRC
Air Link Optimization
HARQ, CTC