User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 19
The Base Station’s three high-intensity LEDs are intended to be viewable from the ground for quick
confirmation of the unit’s operational state. Table 2 describes the function of each indicator. Note that
the LEDs can be turned off by the operator using the PureView NMS, the Web Interface, or the Base
Station’s command-line interface.
LED
Function
STATUS
Green - BS is up and running normally. No faults detected.
Blinking Red – System booting up, or system is temporarily down.
Solid Red - Fault detected.
Off – LEDs disabled or Power is off. Fault detected if POWER LED is Green, but
STATUS LED is Off.
LINK
(Status LED for ETH-1 Gigabit Ethernet Port)
Solid Green – Connected to an Ethernet switch.
Blinking Green – Ethernet packet activity.
Off – LEDs disabled or no Ethernet activity detected.
POWER
Green – Power is being supplied to the BS.
Off – LEDs disabled or no power is being supplied to the BS.
Table 2: Base Station LED Description