User's Guide Part 1

PureWave Quantum 6600 User Guide v2.1
Page 12
1 Preface
1.1 About This Document
The purpose of this User Guide is to quickly familiarize the user with the PureWave Quantum 6000
family of Base stations, their initial setup, and provisioning. It is not intended to be a comprehensive
reference for the product and all its capabilities, nor does it cover in depth provisioning, operation, or
administration using the PureView Network Management System or the PureWave Quantum
Command-Line Interface. Please refer to their respective user guides for more in-depth coverage of
those tools.
Please also note that this guide does not cover the physical installation of the product, but rather
assumes that the Base station has been fully installed and is ready to be powered on. Please refer to the
PureWave Quantum 6600 Installation Guide for detailed professional installation guidelines.
Always refer to the current set of Release Notes for the most up to date information and a description of
the current features as they relate to the PureWave system. These may be different from and supersede
the information contained within this “Installation Guide”.
1.2 Symbols used in this Document
Notes, cautions and timesavers use these conventions and symbols:
Tip
Means the following will help you solve a problem. The tips information might
not be troubleshooting or even an action, but could be useful information.
Note
Means reader take note. Notes contain helpful suggestions or references to
materials not contained in this manual.
Caution
Means reader be careful. In this situation, you might do something that could
result equipment damage or loss of data.
Warning
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents.
1.3 Locating the Product Serial Number
The product identification information, serial number, and certification information are located on a
label on the side panel of the Base station. Please take note of and keep this information for your
records, as it is very important for warranty and support services.