User's Guide

Quantum 2200 Installation Guide v2.1
Page 16
3.2 The Pole-Mount Kit
The optional PureWave Quantum Base Station Pole Mounting Kit provides all hardware required for
installing the base station on a pole ranging from 2.5-5 inches in diameter. It is important to note that
the use of a pole mount in no way dictates that the base must actually be deployed on top of a long
pole, although in many cases it will in fact be. Alternatively the base station may be conveniently
attached to a short pole, which may then be easily mounted to a metal frame or struts that conform to
the specific deployment using commonly available hardware. An example of this is shown in Figure 6.
Figure 6: Example Deployment Consisting of Pole Attached to a Metal Frame
The PureWave Quantum Base Station Pole Mount Kit has been specifically designed to
handle the weight of the base station. However, it is critical that the full weight of the base
station plus mounting hardware be considered in designing the overall base station mounting
solution.
Fully assembled, the PureWave Quantum Base Station Pole Mount Kit weighs 16lbs (7.3kg).