Quick Start Guide

Designed for Operators, by Operators
83 | P a g e
Figure 83 Web Server HTTP Support
3.5.3.10 Configuration Settings
All the Base Station configuration parameters are contained and stored local on the Base Station in
flash memory, via a number of configuration files. The User has the complete control to perform a
variety of functions such as copy, move, delete and restore etc. on these files. This presents a User
with an option, in the event that they would like to reconfigure a Base Station or the Subscriber CPE
profiles they can copy and export a configuration file which can then easily be edited and downloaded
back onto the Base Station. This is an alternative approach to the screen by screen configuration
method that is detailed in this User Guide.
At the Main Web GUI Interface Screen select the Configuration Tab and select the configuration Main
Menu Option. This will display the configuration Settings and the display is split into two main grouping
sections (Figure 76). There are ten Main Menu Sub-Elements associated with the configuration Main
Menu Option. The main grouping sections are:
• Configuration File Operation Status. This indicates the Configuration File operation status when
the User is downloading or uploading a configuration file. The parameters that are displayed are
as follows.
o State. This indicates execution state of the configuration command. It is not a
configurable parameter and simply states the current status, for example Idle.