Quick Start Guide

Designed for Operators, by Operators
80 | P a g e
To view the current System Time and Date Settings then at the Main Web GUI Interface Screen select the
Configuration Tab, select time Main Menu Option and then the set Main Menu Sub-Element. The display
is split into two main grouping sections. (Figure 80).
• Set System Time and Date. This is a text box that contains the Perform Command Menu Option.
• Time and Date. The User is free to configure the Time and Date. The dialog time is specified
in 24-hour format and includes milliseconds (“Ms”), which may simply be set to 0. TzH is the
time zone hours offset from Coordinated Universal Time (UTC) and is between -23 and +23.
TzM is the time zone minutes offset from Coordinated Universal Time (UTC) and is between 0
and 59. Once these parameters have been configured, the User must select the Perform
Command Menu Option for the changes to be affected.
Figure 80 Time NTP Server System Set
To view the NTP Time/Date Synchronization then at the Main Web GUI Interface Screen select the
Configuration Tab, select time Main Menu Option, then ntp Main Menu SubElement and then
ntpdate. The display is split into two main grouping sections (refer to Figure 81).
• NTP Time/Date Synchronization. This command will perform a one-time synchronization to
the selected NTP server. To apply the User simply needs to select the Perform command
button.
• NTP Time/Date Synchronization. The User can configure the NTP Server IP address to perform
the one-time synchronization with.