Quick Start Guide

Designed for Operators, by Operators
75 | P a g e
The parameters to configure for the Base Station Static Management IP Address are:
• Address
• Netmask
• Default Gateway
• VLAN Enabled
• VLAN ID
• VLAN Priority
Figure 75 System Management Static IP Address and VLAN
3.5.3.6 GPS Settings
The use of a GPS for air frame synchronization is mandatory if more than one Base Station is installed
in a geographical area where potential radio transmissions could interfere with one another. GPS is
enabled or disabled via the GPS option.
At the Main Web GUI Interface Screen select the Configuration Tab and then select the gps Main Menu
Option. This will display the GPS Settings and Status window (Figure 76). The gps Main Menu Option
has no further sub-elements.