Quick Start Guide

Designed for Operators, by Operators
63 | P a g e
• abort. Specify a CPE via its MAC Address. Hit Perform and the current ranging operation will
cease, and the CPE will attempt to re-enter the network. Refer to Figure 60.
• deregister. Specify a CPE via its MAC Address. Hit Perform and the current CPE will be
deregistered from the sector. Refer to Figure 61.
• reset. Will put the sector in a special mode to measure noise and interference (Figure 61)
Figure 60 De-register CPE
Figure 61 Reset CPE Action