Quick Start Guide

Designed for Operators, by Operators
6 | P a g e
For performance and safety reasons, only power supplies listed for use with telephone
equipment by a Nationally Recognized Testing Laboratory (NRTL) should be used with
equipment.
ALL wiring external to the product(s) should follow the provisions of the current edition
of the National Electrical Code.
These units contain no user serviceable components. Only authorized service personnel
should service or repair these units. Use only isolated Class 2 Power Source, Rated
48VDC, 5.0A Minimum.
1. Preface
1.1 About This Document
The purpose of this User Guide is to quickly familiarize the user with the Mercury Networks Quantum
6000 family of Base stations, their initial setup, and provisioning. It is not intended to be a comprehensive
reference for the product and all its capabilities, nor does it cover in depth provisioning, operation, or
administration using the PureView Network Management System or the Mercury Networks Quantum
command line interface. Please refer to their respective user guides for more in-depth coverage of those
tools.
Please also note that this guide does not cover the physical installation of the product, but rather assumes
that the Base Station has been fully installed and is ready to be powered on. Please refer to the Mercury
Networks Quantum 6600 Installation Guide for detailed professional installation guidelines.
Always refer to the current set of Release Notes for the most up to date information and a description of
the current features as they relate to the Mercury Networks system. These may be different from and
supersede the information contained within this “Installation Guide”.
1.2 Locating the Product Serial Number
The product identification information, serial number, and certification information are located on a label
on the side panel of the Base station. Please take note of and keep this information for your records, as it
is very important for warranty and support services.
1.3 Obtaining Documentation and Support
All requests for documentation and/or support should be addressed to:
Mercury Networks, LLC.
1100 Walnut St, Suite 2050
Kansas City, Missouri 64105
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]