Quick Start Guide

Designed for Operators, by Operators
59 | P a g e
• Mode (enable/disable). Allows the feature to be enabled or disabled
• Carrier Sense Threshold. Set to -85.0 dBm by default. Any signals detected beyond this threshold
will be ignored
• Carrier BackOff Frame. Number of frames to wait for transmission when an interfering carrier is
detected
• Carrier Sense Resume Frame. Number of frames to resume listening when an interfering carrier
is detected. Default is 752.
Figure 54 Contention Based Mode
Omniwave may be enabled on the radio level to support a 3x2x2 configuration. To utilize Omniwave, at
the Main Web GUI Interface Screen select the Configuration Tab, select sector Main Menu Option,
advanced Main Menu Sub-Element, 1, and then radio and omniwave.
• Mode (enable/disable). Allows the feature to be enabled or disabled
• Status. Current configuration (enabled or disabled)