Quick Start Guide

Designed for Operators, by Operators
47 | P a g e
Figure 40 Sector General Provisioning Parameters
At the Main Web GUI Interface Screen select the Configuration Tab, select sector Main Menu
Option, general Main Menu Sub-Element, 1, system and then ip and this will display the
current configuration of the Sector External IP Address (Figure 41). This is a different IP address
from the one configured on the Base Station and is recommended to be configured within the
same IP subnet as the Base station IP pointing to the same default gateway. This IP address is
used for:
o Generation of AAA Authentication requests (if sector security is enabled) when
operating in Stand Alone mode.
o As the Source for all data traffic (towards the network) when operating in IP CS Stand
Alone mode.
o As the GRE tunnel source for all data traffic when operating in ASN Gateway mode.
• Address. This is the IP address
• Netmask. This is the netmask associated with the IP address
• Gateway. This is the default gateway.