Quick Start Guide

Designed for Operators, by Operators
45 | P a g e
• Number of MSS Subscribers. This is a count of the current Subscribers that are connected to
the sector.
• Number of Service Flows. This is a count of the total number of Subscriber service flows that are
currently in use.
• Sector Software Version Status. Indicates the sector software version if there is a mismatch or
if the sector is running from a recovery image.
• Running Software Version. This is the current running sector software version.
• Last Reset Reason. This provides a reason for the last sector reset.
Figure 39 Sector Key Settings
At the Main Web GUI Interface Screen select the Configuration Tab, select sector Main Menu Option,
general Main Menu Sub-Element, 1 and then system. This will display the currently configured Sector
General Provisioning window. There are a further two sub-elements to this window but only one is
displayed.
These sub-elements are:
• system. This option enables the User to configure the parameters.
• state. This is a duplication of the windows and parameters that are contained within the system
options. These are "read-only" screens and provide an indication as the current state or status
of the system parameters.
The status of the following parameters is displayed, and the User is free to configure as required (refer
to (Figure 40). To edit and configure then the User must enter the Edit Mode (select Edit
Private/Exclusive):
• Base Station ID. This is the unique identifier that specifically identifies the Base Station to the
Subscribers. It is recommended that this is changed to have a unique value in deployment. For
inter-provider handover, please see the IEEE 802.16e guidelines.
• Cell ID. This is a numeric identifier that will define the cell (acceptable range is 0 to 31).