Quick Start Guide

Designed for Operators, by Operators
44 | P a g e
• Key Settings. This indicates the relevant sector, which as has been described in number 1.
This is not a configurable parameter. A new key may be added in Edit Mode (Figure 39)
• Sector General Administration (configured). This is an indication whether the sector has
been enabled for general administration. This parameter is not used. Use the Auto Transmit
after Reset Mode parameter to disable the Sector from transmitting after the next reset.
See Section
• Sector General Status. This indicates the current status of the following parameters. These
parameters are non-configurable:
Figure 38 Sector General Options
The Key Settings are defined by the following parameters (Figure 39):
• Operational State. This indicates if the Sector is operational
• GPS State. This indicates the GPS status of the Sector.
• Restart Count. This is a cumulative count of the number of sector restarts since the Base Station
was power cycled.
• Current Frame Number. Represents the count of WIMAX frames being allocated for
transmission.