Quick Start Guide

Designed for Operators, by Operators
41 | P a g e
7. The IP address change to the Base station is immediate and does not require a reboot
8. Another useful command is the ability to change the default Quantum prompt. When the User
is in the config mode, type system hostname <Hostname> (refer to Figure 36). The change
must be written to memory and the Base Station must be rebooted
Figure 36 Base Station CLI Hostname Change
9. To change the username admin password, when the User is in the config mode, type
username admin password
• Password <new admin User Password>
The change must be written to memory (Figure 37).
Figure 37 Base Station CLI Username Password Change