Quick Start Guide

Designed for Operators, by Operators
32 | P a g e
3.4.2 Web GUI CLI Access Level
The Mercury Quantum Base Station has a Command Line Interface (CLI) that can be accessed from
within the Web GUI. To access the Web GUI CLI then at the Main Web GUI Interface Screen, select the
Tools Tab. The User will be presented with a number of User tools as below.
Figure 21 The Tools Tab Menu Options
• The User is presented with four Tools Command Menu Options. These are:
o Logs. This allows the User to display and hence view:
▪ System log
▪ Alert log
▪ Audit log
• Accessories. The following protocols are made available to the User:
▪ Ping
▪ Traceroute
▪ CPU Load
o CLI. The User has access to the CLI and can execute all the CLI commands directly if
required.
o Users. This indicates all the Users that are currently connected to the Base Station. It
also provides a means to physically "kick" them off their connection. In addition, a
message board is provided thus enabling instant messages to be sent to the Users
that are currently connected to the Base Station.
3.4.2.1 Tools Logs
At the Main Web GUI Interface Screen, select the Tools Tab and then Logs.
Figure 22 The Tools Tab Logs Menu