Quick Start Guide

Designed for Operators, by Operators
150 | P a g e
the User navigates to this level, then it will display a list of all the log servers that have been configured.
The User can select to view the relevant details.
• Default Remote Log Server Settings. The User can view and hence configure the default minimum
severity log level to forward to the remote server. This will apply to all remote servers which have
a level of default. The User must be in Edit Mode to configure. In addition to the default level
there are nine available options. These are:
o none
o debug
o info
o notice
o warning
o error
o critical
o alert
o emergency
• Remote Log Server Settings. For log servers that have configured the following information is
displayed. To configure the User must be in Edit Mode. Once in Edit Mode, the User can <Add
host>, delete or change the Severity Level of an existing host.
o Hostname. If the User wants to add a remote server then they must enter the syslog
remote server IP address or domain name. The User cannot edit the hostname for a
syslog server that has been configured, this syslog must be deleted and then it can be
re-added. When in the Edit Mode, there is a red box beside each hostname. If the User
navigates to the red icon, then this will present the User with the ability to delete the
hostname.
o Security Level. The User can configure or re-configure the syslog server to that of the
default level or any of the nine available options.
Figure 156 Logging Remote Host Information