Quick Start Guide

Designed for Operators, by Operators
146 | P a g e
▪ QAM64 5/6
o UL MCS. This indicates the current uplink MCS rate. The available options are the same
as the downlink.
o DL HARQ STATE. Indication if any of the downlink services flows have HARQ Enabled.
o DL MCS HARQ. The current MCS Rate used for the downlink services flows that have
HARQ.
o UL HARQ STATE. Indication if any of the uplink services flows have HARQ Enabled.
o UL MCS HARQ. The current MCS Rate used for the uplink services flows that have
HARQ.
Figure 152 Sector Statistics Modulation Code Counters
At the Main Web GUI Interface Screen select the Configuration Tab and then the sector Main Menu
Option, then the statistics-mss Main Menu Sub-Element and then activeservice-flows. The Service Flows
that are active for each Subscriber will be displayed. For each Subscriber there will be at least two active
Service Flows, one for Upstream and another for Downstream. There are two distinct groups to this
window (Figure 153).
• Key Settings. This indicates the relevant Subscriber. This is not a configurable parameter. The
following information is presented:
o Sector
o MAC Address
o Svc Flow ID. This is the Service Flow identifier.
• Active Service Flows. The following Metrics are displayed. These are displayed as a raw number,
but they can also be displayed in graphical form by selecting the "Graph" command button.
o Svc Flow Dir. This provides an indication of the respective direction. The options are
uplink or downlink.