Quick Start Guide

Designed for Operators, by Operators
130 | P a g e
Figure 134 Software Image Bank Selection Display
The purpose of the Select Next image bank to boot from is to specify the selected image to run after the
next reboot. It will not affect the currently "Running" image. Subsequent reboots will run the "Selected"
software image (Figure 135). The available choices are:
• A: The image loaded in image bank A.
• B: The image loaded in image bank B.
• Next: The alternative to the currently "Running" image. If the current image is A, the next boot
will use B and vice versa.
• Now. This is a check box that must be enabled to perform automatic reset.
Figure 135 Software Image Partition Selection