Quick Start Guide

Designed for Operators, by Operators
124 | P a g e
3.5.5.10 VLAN Classification
To configure the tagging options for per-CPE and per-SF basis, classification rules must be configured.
The options for VLAN classification includes:
• CLS-priority (classifier priority)
• CLS-priority-used
• MAC-addr-option
• MAC-address-OUI
For further information on configuring a classifier for VLAN, please see section 3.5.5.1.
To apply a default VLAN profile to a CPE, please see section 3.5.4.
3.5.5.11 VLAN QinQ Configuration
QinQ (or double-tagging) allows multiple VLAN headers to be inserted into a single frame. This
configuration allows the service provider to manage data traffic with their own ID and shield the VLAN ID
of the user, so as to save the public network VLAN ID resource of the service provider. This configuration
mode is used on the per CPE or per Service Flow basis.
To set QinQ configuration:
• VLAN Profile Number. This parameter is a number between 1-94.
• Name/Description. Description for the VLAN Profile
• VLAN Mode. Set this mode to per-sf or per-mss mode
• VLAN Priority. The priority bit (0-7) inside the VLAN Packet that will be sent out with (from the
BST).
• VLAN ID. The VLAN ID (0-4094) that the Packet will be sent out with (from the BST) and/or be
expected to be received (from the Backhaul).
• Ether Type. To configure QinQ set the Ether Type to 0x9100/0x9200/0x9300/0x88a8.