Quick Start Guide

Designed for Operators, by Operators
123 | P a g e
Figure 128 VLAN Profile Configuration
4. The User must Commit the changes (apply the configuration in run-time). To Commit, select the
Commit option. A prompt screen will appear directing the User to confirm the pending
configuration changes. To proceed the User must select Cancel or OK.
The transparent mode configuration may also be used in combination with management VLAN where the
system management interface VLAN is configured with a separate VLAN id. This will allow the
management traffic to be isolated from data traffic.
In the Per CPE Basis (or per-mss) mode, the CPE will automatically have its traffic tagged with the
configured VLAN ID for traffic leaving the base station. This configuration may also be used in combination
with management VLAN where the system management interface VLAN is configured with a separate
VLAN id. This will allow the management traffic to be isolated from data traffic. Additionally, a per Service
Flow VLAN may be used in combination with this configuration providing that the VLAN classification rules
are set correctly.
In the Per Service Flow Basis, the CPE will automatically have its traffic tagged with the configured VLAN
ID for traffic leaving the base station. This configuration may also be used in combination with
management VLAN and the per-CPE based configuration.