Quick Start Guide

Designed for Operators, by Operators
122 | P a g e
Figure 127 VLAN Profile Number
3. The User is now presented with a window that displays the following parameters. With the
configuration below, it is assumed that the CPEs and Base Station have their VLAN
tagging/untagging performed by other devices either behind the CPE or Base Station.
• VLAN Profile Number. This parameter is a number between 1-94. It is recommended to leave
Profile 1 unchanged.
• Name/Description. Description for the VLAN Profile
• VLAN Mode. Depending on your configuration, set this mode to Transparent, per-sf or per-
mss
• VLAN Priority. The priority bit (0-7) inside the VLAN Packet that will be sent out with (from
the BST).
• VLAN ID. The VLAN ID (0-4094) that the Packet will be sent out with (from the BST) and/or
be expected to be received (from the Backhaul).
• Ether Type. The Ethernet Type of the Packet that will be sent out with (from the BST) and/or
expected to be received with). Valid Range is: 0x8100(802.1q),
0x9100/0x9200/0x9300/0x88a8 (QinQ).