Quick Start Guide

Designed for Operators, by Operators
110 | P a g e
o Timeout-rx-delay. This is the ARQ Receive Retry Timeout Delay. This is assigned in units
of 5msec in the range 0 to 1310 with a default of 5 (25msec).
o Block-lifetime. This is the ARQ Transmit Retry Timeout Delay. This is assigned in units of
5msec in the range 0 to 1310 with a default of 5 (25msec).
o Sync-loss. This is the ARQ Sync Loss Timeout. This is assigned in units of 5msec in the
range 0 to 1310 with a default of 120 (600msec).
o Purge-timeout. This is the ARQ Purge Timeout. This is assigned in units of 5msec in the
range 0 to 1310 with a default of 32 (160msec).
o Block-size. This is the ARQ Block Size. The options are 16, 32, 64, 128 (default), 256, 512
and 1024.
o Ack-processing-time. This is the ARQ Acknowledge Processing Time. This is assigned as a
number in msec in the range 0 (default) to 255.
The System is pre-configured with 6 default profiles. If the User wants to add any of their own
configurations, they must delete a profile before they can add and configure a new one.
When in Edit mode, the User is presented with:
• <Add arq-profile>. If the User selects this option and there is available profile to be added, then
they can simply add and then they will be dropped directly into the configuration window.
• A List of all the profiles with a red box beside each profile. If the User navigates to the red icon
then this will present the User with the ability to delete the profile (Figure 114).
Figure 114 Service Profile ARQ Profile Edit Capability