Quick Start Guide

Designed for Operators, by Operators
108 | P a g e
The main grouping sections are:
• Key settings. This simply displays:
o Profile #
• Hybrid ARQ Profile. This displays all that the available configuration parameters. These are:
o Name. This is the profile name and it is a text field
o Description. This is the profile description and it is a text field
o Enable. This is a check box to enable/disable the HARQ function
o Channel-mapping. This is the HARQ Map Length. This is assigned as a number in the range
0 to 16 with a default of 4
o Num-retires. This is the HARQ Number of Retries. This is assigned as a number in the
range 0 to 16 with a default of 1
o Pdu-sn-support. This is the HARQ PDU Sequence Number Support. The options are none,
short (default) and long for reordering control. PDN sequence number is used to re-order
HARQ bursts on the receiver. Short uses 3-byte sequence number and the long uses 4
byte. In general long is better in DL and short is enough in the UL. It is recommended to
keep the default settings.
The System is pre-configured with 6 default profiles. If the User wants to add any of their own
configurations, they must delete a profile before they can add and configure a new one.
When in Edit mode, the User is presented with (Figure 112):
• <Add harq-profile>. If the User selects this option and there is available profile to be added, then
they can simply add and then they will be dropped directly into the configuration window.
• A List of all the profiles with a red box beside each profile. If the User navigates to the red icon,
then this will present the User with the ability to delete the profile.
Figure 112 Service Profile HARQ Profile Edit Capability