Quick Start Guide

Designed for Operators, by Operators
105 | P a g e
o Src-port-start. This is the Source Port Low Limit. This is assigned as a number in the range
0 (default) to 65535.
o Src-port-end. This is the Source Port High Limit. This is assigned as a number in the range
0 (default) to 65535.
o Src-ip-port-used. This is a check box to enable/disable the Source Port rule.
o Vlan-id. This is the VLAN ID Tag. This is assigned as a number in the range 0 (default) to
4095.
o Vlan-id-used. This is a check box to enable/disable the VLAN ID rule.
o Vlan-user-priority-low. This is the VLAN User Priority Low Byte. This is assigned as a
number in the range 0 (default) to 7.
o Vlan-user-priority-high. This is the VLAN User Priority High Byte. This is assigned as a
number in the range 0 (default) to 7.
o Vlan-user-priority-used. This is a check box to enable/disable the VLAN User Priority rule.
o Mac-addr-option. This is a drop-down list to specify if a MAC address will be used for
classification. The default value is auto. Other options include CPE_MAC or OUI
(Organizationally Unique Identifier). The OUI is a unique 24-bit string assigned to
hardware manufacturers.
o Mac-addr-oui. If OUI is specied in the Mac-addr-option, then this field will be visible. It
will allow a 24-bit string to be specified to identify the hardware manufacturer.
o Allow-arp. This is a check box to enable/disable the ARP broadcasts.
Figure 108 Classifier Profile