Quick Start Guide

Designed for Operators, by Operators
102 | P a g e
This just provides an indication of the information that is displayed. A description of the variables will be
provided when the Main Menu Sub-Elements are described. The five main grouping sections are:
• Classifier Profiler. The User can define up to 64 Classifier profiles. A list of profiles (up to 16 at a
time) and the following information is displayed for each Classifier:
o Profile #
o Name
o Description
o Cls-priority
o Cls-priority-used
o Eth-type
o Eth-type-used
o Ip-tos-dscp
• Hybrid ARQ Profile. The User can define up to 6 profiles and the following information is displayed
for each profile:
o Profile #
o Name
o Description
o Enable
o Channel-mapping
o Num-retries
o Pdu-sn-support
• ARQ Profile. The User can define up to 3 profiles and the following information is displayed for
each profile. It is recommended to keep default values.
o Profile #
o Name
o Description
o Enable
o Deliver-in-order
o Window-size
o Timeout-tx-delay
o Timeout-rx-delay
o Block-lifetime
o Sync-loss
o Purge-timeout
o Block-size
o Ack-processing-time
• QoS Profile. The User can define up to 32 profiles and the following information is displayed for
each QoS profile:
o Profile #
o Name
o Max-sustained-traffic-rate
o Max-latency
o Data-delivery-service
o Traffic-priority
o Max-traffic-burst