User's Guide

PureWave Quantum 6600 Installation Guide v2.1
Page 28
7 Connecting Ethernet and Serial Console Cables
7.1 The PureWave Basic DC Installation Kit
Each PureWave Quantum Base Station is shipped with the PureWave Quantum Basic DC Installation Kit,
which contains hardware and components required for connecting and waterproofing the ethernet
ports, console port, the power port, and the grounding terminal. This kit has been shipped in the same
box as the base station. Please locate it and compare its contents to Table 7.
Table 7: PureWave Quantum Basic DC Installation Kit Contents
Item
Quantity
Purpose
a) 6” Cat 5e Cable
1
Connects base-station serial/console port
connector to DB9 to RJ45 adaptor (c)
b) DB9 Female to DB9 Female Serial Cable
1
Connects serial consol/terminal to DB9 to RJ45
adaptor (c)
c) Network DB9 Female to RJ45 Adaptor
1
Couples cables for serial console connection (a, b)
d) DC Connector 4 Pin Female Plug
1
Part of DC power connector subassembly (d, e, f)
e) 14-18 AWG Circular Socket Crimp Contact
4
Part of DC power connector subassembly (d, e, f)
f) Cable Clamp Connector
1
Part of DC power connector subassembly (d, e, f)
g) RJ45 IP67 Weatherproof Housing
3
Weatherproof housing subassemblies for ETH-1,
ETH-2, and Console Connectors
h) Insulated Crimp Ring Terminal
1
Attaches to base station ground terminal using
provided hardware (l, m, n)
i) NEVER-SEEZ® Lubricant, 1oz tube
1
Anti-corrosive lubricant
j) Weatherproofing Kit
1
For all connectors. Recommended
weatherproofing procedures are provided in this
document.
k) RJ45 Plug Shielded Connector
6
Provided for use in creating custom-length CAT-5
cables for ETH1, ETH2, and Console connections.
l) Washer, Metric M5 Flat
1
Part of crimp ring subassembly (h, l, m, n)
m) Washer/Metric, M5 External Tooth Lock
1
Part of crimp ring subassembly (h, l, m, n)
n) Hex Nut Metric, M5-.8
1
Part of crimp ring subassembly (h, l, m, n)
o) Extra Hardware Kit
1
A variety of extra parts for convenience