User's Manual

Quantum 1000 Base Station User
2)
Take the plastic RJ45 holder and ensure that the rubber RJ45 cut out is stuck onto the RJ45
holder (figure 36)
3)
Pull the cable plus RJ45 connector through the RJ 45 holder and ensure that
is pulled tight into the holder. Ensure that the connector flap is locked in place (figure 3
Figure
3
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
Take the plastic RJ45 holder and ensure that the rubber RJ45 cut out is stuck onto the RJ45
Figure 36 – Plastic RJ45 Holder
Pull the cable plus RJ45 connector through the RJ 45 holder and ensure that
the RJ45 connector
is pulled tight into the holder. Ensure that the connector flap is locked in place (figure 3
3
7 – Plastic RJ45 Holder plus RJ45 Cable
Rev 1.1, Page
35 of 70
Take the plastic RJ45 holder and ensure that the rubber RJ45 cut out is stuck onto the RJ45
the RJ45 connector
is pulled tight into the holder. Ensure that the connector flap is locked in place (figure 3
7).