User's Manual

Quantum 1000 Base Station User
4)
Install the rubber ring around the cable and the other components as
Figure
5)
Tighten the end cable locks and the assembly is complete (figure 3
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
Install the rubber ring around the cable and the other components as
shown in figure 3
Figure
38 – All Components Assembled
Tighten the end cable locks and the assembly is complete (figure 3
9).
Figure 39 – Complete Assembly
Rev 1.1, Page
36 of 70
shown in figure 3
8.