User's Manual

Quantum 1000 Base Station User
Identifying the RJ-45 Cable Type
To identify the RJ-
45 cable type, hold the two ends of the cable next to each other so you can see the
colored wires inside the ends, as shown. In a straight
sequence at
both ends of the cable.
When making a straight-
through cable using Cat 5E, it is mandatory that you follow the 568
shown below. Otherwise, you risk the possibility of damaging the
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
Ethernet Cat 5 Cable
45 cable type, hold the two ends of the cable next to each other so you can see the
colored wires inside the ends, as shown. In a straight
-
through cable, the colored wires are in the same
both ends of the cable.
through cable using Cat 5E, it is mandatory that you follow the 568
shown below. Otherwise, you risk the possibility of damaging the
equipment.
Rev 1.1, Page
69 of 70
45 cable type, hold the two ends of the cable next to each other so you can see the
through cable, the colored wires are in the same
through cable using Cat 5E, it is mandatory that you follow the 568
-B standard