User's Manual

Quantum 1000 Base Station User
After you successfully login, you will see “
Figure 59 -
Hyper Terminal Login window to Base Station CLI
1) Select
1 (CONFIGURATION)
Station (figure 60).
Figure
2) From the
1.1 BASIC CONFIGURATION
Station IP address for
Management purposes. You must use “Quotations” when changing the IP
address and specify the class of the subnet mask after the slash.
The default BS IP Address is 192.168.2.101/24
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
After you successfully login, you will see “
PUREWAVE MANAGEMENT UTILITY
” Dialog box (figure
Hyper Terminal Login window to Base Station CLI
1 (CONFIGURATION)
from the menu and follow the steps carefully to configure the Base
Figure
60 - Base Station CLI Basic Configuration
1.1 BASIC CONFIGURATION
menu, select 2
(DATA PORT IP Addr). T
Management purposes. You must use “Quotations” when changing the IP
address and specify the class of the subnet mask after the slash.
The default BS IP Address is 192.168.2.101/24
Rev 1.1, Page
53 of 70
” Dialog box (figure
59).
from the menu and follow the steps carefully to configure the Base
(DATA PORT IP Addr). T
his is Base
Management purposes. You must use “Quotations” when changing the IP