Product Manual
Table Of Contents
- 4/5/6 FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Outboard Care
- EPA Emission Regulations
- Inspection and Maintenance Schedule
- Flushing the Cooling System
- Top Cowl Removal and Installation
- Corrosion Control Anode
- Exterior Care
- Fuel System
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Lubrication Points
- Changing Engine Oil
- Gearcase Lubrication
- Submerged Outboard
- Storage
- Owner Service Assistance
- Maintenance Log
• Transom clamp screws ‑ lubricate threads.
a - Transom clamp screws
NOTE: Lubricating the tiller handle bushing and shift detent shaft requires
disassembly of the product. These points should be lubricated at least once a
year by an authorized dealer.
• Tiller handle rubber bushing ‑ lubricate internal diameter.
a - Tiller handle rubber
bushing
• Shift detent ‑ lubricate detent shaft.
a - Shift detent
a
45641
a
45642
a
45648
MAINTENANCE
44 eng