Product Manual
Table Of Contents
- 4/5/6 FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Outboard Care
- EPA Emission Regulations
- Inspection and Maintenance Schedule
- Flushing the Cooling System
- Top Cowl Removal and Installation
- Corrosion Control Anode
- Exterior Care
- Fuel System
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Lubrication Points
- Changing Engine Oil
- Gearcase Lubrication
- Submerged Outboard
- Storage
- Owner Service Assistance
- Maintenance Log
2. Disconnect the linkage from the rewind starter assembly.
a - Rewind starter assembly
b - Linkage
3. Remove the three 10 mm bolts and rewind starter assembly.
a - 10 mm wrench ‑
provided with
outboard
!
WARNING
The exposed moving flywheel can cause serious injury. Keep your hands,
hair,
clothing, tools, and other objects away from engine when starting or
running the engine. Do not attempt to reinstall the rewind starter assembly
or top cowl when engine is running.
4. Place the starter rope knot into the starter cup notch and wind the rope
clockwise around the cup.
a
b
45630
a
45631
OPERATION
eng 33